空间系绳系统安全性研究综述

系绳技术在空间探测与航天技术领域相较于现有空间技术具有很大优势,随着空间系绳技术的快速发展,其安全性越来越得到关注。首先从理论研究及空间试验两方面对系绳系统安全性的研究现状进行了总结,分析了空间试验的失败原因。其次,详细描述了影响系绳系统安全性的几个因素——空间环境、系绳材料、编制结构、涂层材料及释放机构的设计。最后提出了提升系绳系统安全性的方法,并对系绳系统安全性的研究热点及发展趋势进行了预测。     

Reference gene validation for quantification of gene expression during final oocyte maturation induced by diethylstilbestrol and di-(2-ethylhexyl)-phthalate in common carp

Final oocyte maturation is the key step to successful spawning and fertilization.Quantitative real-time PCR(q PCR) is the technique of election to quantify the abundance of functional genes in such study. Reference gene is essential for correct interpretation of q PCR data. However, an ideal universal reference gene that is stable under all experimental circumstances has not been described. Researchers should validate their reference genes while performing q PCR analysis. The expression of 6 candidate reference genes: 18 s r RNA,28 s r RNA, Cathepsin Z, Elongation factor 1-α, Glyceraldehyde-3-phosphate dehydrogenase andβ-actin were investigated during final oocyte maturation induced by different compounds(DES and DEHP) in common carp(Cyprinus carpio). Four softwares(Bestkeeper, ge Norm,Norm Finder and Ref Finder) were used to screen the most stable gene in order to evaluate their expression stability. The results revealed that EF1α was highly stable expressed when final oocyte maturation was induced by DES, while gapdh was the most stable gene when final oocyte maturation was induced by DEHP. Stable expressed reference gene selection is critical for all q PCR analysis to get accurate target gene m RNA expression information.     

难熔金属表面高温防护涂层研究进展与技术展望

回顾了难熔金属五大高温防护涂层体系的发展现状,即生成保护性氧化膜的金属间化合物涂层、贵金属涂层、生成保护性氧化膜的合金涂层、惰性氧化物陶瓷涂层以及玻璃陶瓷基复合涂层,总结了这些涂层的高温防护机理、制备方法以及失效机制。基于单一的传统高温防护涂层体系已经难以满足新一代高比冲姿、轨控火箭发动机以及高超声速飞行器热端部件对高温防护涂层提出的抗超高温氧化性能、优良的抗热震性能、良好的抗热冲刷(烧蚀)性能以及长服役寿命等性能需求的现状,简要介绍了过渡族金属的硼化物、碳化物等几种潜在的新型高温防护涂层材料体系,以及相应的涂层制备方法,这些新型涂层体系的发展有望满足现代宇航工业难熔金属热端部件的高温防护需求。     

陶瓷材料放射性衰变时间及最佳平衡周期研究

简述了有关放射性样品衰变平衡及平衡时间的基本理论,运用碘化钠γ谱仪对衰变时间介于0～27 d区间内的三组陶瓷样品进行放射性比活度测定,采取t检验法分析了同一样品在0d～7d、7d～12d、15 d、21 d等不同衰变时间条件下,放射性核素226Ra、232Th、40K比活度测试结果之间的差异程度,通过实验验证陶瓷样品衰变时间对其放射性测定结果准确性的影响.研究表明,当每组检测结果数据的显著性差异水平为5％,若兼顾科学性和经济性,则陶瓷样品的最佳放射性衰变时间应为至少21 d.     

Dissolved Ions of Trace and Major Elements and in Suspended Sediments in the Nile, Egypt

Dissolved ions and suspended participates from twelve water samples from Sohag (different localities) and Aswan (behind and below the High Dam) areas were collected along the River Nile, upper Egypt, which is at present affected seriously by pressure of population, intense industrial and agricultural activities, and atmospheric fallout. Eighteen trace and nine major ions in solution and fourteen metals in suspension were analyzed to establish whether elements are of anthropogenic or natural origin. Results of this study show that the Nile water was contaminated with high concentrations of dissolved lead, and with copper, nickel and mercury to a lesser extent, suggesting that these contaminants are generated from anthropogenic activities. the other dissolved ions in the Nile are of natural origin because their metal concentrations fall within the range of the normal background and average world dissolved values for inland waters. Results show that the usual constituents of suspended particulates in the Nile seem to be some metals (Cu and Zn) adsorbed on iron and manganese oxide/hydroxide. the results also reveal that most trace and major metal particulates increase from south to north due to activities associated with the dense population living along the Nile banks. No significant differences were observed between the chemical composition of trace and major elements taken on the east and west river Nile banks.     

Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology

Here, we focused on the recycling of waste printed circuit boards (WPCBs) using vacuum pyrolysis-centrifugation coupling technology (VPCT) aiming to obtain valuable feedstock and resolve environmental pollution. The two types of WPCBs were pyrolysed at 600°C for 30 min under vacuum condition. During the pyrolysis process, the solder of WPCBs was separated and recovered when the temperature range was 400-600°C, and the rotating drum was rotated at 1000 rpm for 10 min. The type-A of WPCBs pyrolysed to form an average of 67.91 wt.% residue, 27.84 wt.% oil, and 4.25 wt.% gas; and pyrolysis of the type-B of WPCBs led to an average mass balance of 72.22 wt.% residue, 21.57 wt.% oil, and 6.21 wt.% gas. The GC-MS and FT-IR analyses showed that the two pyrolysis oils consisted mainly of phenols and substituted phenols. The pyrolysis oil can be used for fuel or chemical feedstock for further processing. The recovered solder can be recycled directly and it can also be a good resource of lead and tin for refining. The pyrolysis residues contained various metals, glass fibers and other inorganic materials, which could be recovered after further treatment. The pyrolysis gases consisted mainly of CO, CO(2), CH(4), and H(2), which could be collected and recycled.     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

有证标准样品的应用及其管理方法探讨

介绍了有证标准样品的定义和主要作用,详细阐述了有证标准样品在检测实验室的7个主要应用领域、正确使用指南和科学管理方法,以保证检测实验室检测结果的准确和量值溯源性。     

固体废弃物在新型墙体材料中的资源化利用

探讨了工业废弃物、农业废弃物和建筑废弃物在新型墙体材料中的各种资源化利用。将各种固体废弃物变废为宝,综合利用,能够减少对环境的污染,缓解资源紧张现象,是利国利民的好途径。     

基于主成分分析法的危险货物运输企业安全评价

为更准确地评估危险货物运输企业安全等级以降低其运输风险,提出基于主成分分析法(PCA)的危险货物运输企业BP神经网络安全评价模型;在从人-机-物-环境-管理角度构建危险货物运输企业安全评价指标的基础上,分别利用该模型和其他3种模型对3家实例企业进行仿真评价和对比分析。结果表明,该模型的评价结果与期望值间的相对误差约为0.5%～1.2%,计算精度优于其他模型,且具有计算量小等特点。